Modular All-in-One POS
Florence
Your modules. Your setup. Your POS. It’s up to you: modernize your existing system or implement a completely new POS experience. Flexible. Process-oriented. Florence.
The last terminal you replace whole.
The next upgrade is a module, not a system swap.
Four reasons POS systems get replaced too early.
Four patterns routinely lead to POS hardware being replaced while most of it is still working. They share the same root cause - and that is exactly what the Florence architecture addresses.
Many sites, no common standard
What works at one site does not fit the next: different counter, different peripherals, different requirement. Standardising across a large estate fails on the exceptions.
Fixed ports, changing needs
The port layout is locked in at the time of order. Add a device that does not fit and the only options are a hub under the counter or a new system.
Ports left openly accessible
On conventional devices the interfaces stay openly accessible even when mounted - with no port control and no record of who connected what.
One device, one replacement date
The entire device is written off although the larger part of it would still carry its duty. That is capital leaving the asset base early.
What is rigid ages as a whole
That is why Florence is built modular - a patent-pending connector system instead of a sealed enclosure.
See the principle
Three layers you can replace one at a time.
Display
The longest-lived layer. It is not tied to the computer behind it - so the hardware generation does not decide how long a display stays at the station.
Florence Box
The fastest-ageing layer. Because compute lives here and nowhere else, a generation change is a Box swap - and touches no other layer.
Brick Hub
The most frequently changing layer. That is why it is the freely configurable one: ports follow the workstation, not an order placed three years ago.
Four situations where the whole system would otherwise go.
Modularity is not an end in itself. It pays off in specific moments - usually the ones the procurement plan never accounted for.
A new payment terminal has to reach every checkout
Every operation needs a different peripheral list
A display fails in the middle of trading hours
The rollout starts small and needs to grow
Renew the part. Not the terminal.
In most cases the whole terminal is replaced on the shortest cycle inside it. Because the three Florence layers are independent, each carries its own cycle - and what gets renewed is what is actually spent.
Upgrade one part
The rest of the system stays in service - and on the asset register.
Independent compute module
Replace the Florence Box independently of the display and Brick Hub. Software and driver compatibility should be checked for the selected configuration.
One spare parts list
Every configuration draws on the same components - no matter how many variants are in the field.
What a configuration actually looks like.
The Brick Hub consists of the Main Brick and four optional module types. The overview below shows the available connections.
A display outlives a processor. Let it.
A checkout station is not judged on a datasheet but at the counter: when something is plugged in, when something fails, during a shift. Three consequences of the modular architecture that make the difference in operation.
Plug in without hunting
The Brick Hub brings peripheral connections together in one modular unit. Choose the interfaces your workstation needs and position the hub for convenient access.
Swap one part, don’t clear the station
If the computer fails, the Box is lifted off and replaced - display, ports and cabling stay in the counter. The workstation does not have to be dismantled and set up again.
No fan drawing in grease and dust
The Box is passively cooled. At counters with flour, grease or dust there is no fan to clog - and on the sales floor no running noise beside the operator.
Every figure, no registration.
Touch Display
Display Size
15.6“
Aspect Ratio
16:9
Resolution
1920 x 1080
Brightness
350 nits
Touch
PCAP with anti-glare
External Connector
1 × USB-C: data for touch
1 × HDMI: up to 2K at 60 Hz
1 × USB-C: data, display and PD 60 W, or Type-C adaptor in Florence Box
Speaker
3W Speaker
Cable
1 × USB-C to USB-C, 10 Gbps, 1 m; HDMI 1.8 m (optional); power cord (optional)
Peripheral Options
For Florence POS: MSR, fingerprint reader, RFID/NFC, i-Button, 10.1″ USB secondary display, 2D barcode scanner
VESA
75 × 75 mm; 4 × M4 × 4 mm screws
Power supply
100-240V, 50/60Hz, 65W
Storage Temperature
-20°C - 60°C
Operating Temperature
0°C - 40°C
System humidity
15% - 80%
Dimensions (WxHxD)
363.0 × 228.6 × 31.2 mm
Weight
1.92 kg
Florence Box
CPU
Alder Lake-N Intel® Processor N97
Memory
DDR5, 8 GB / 16 GB
Storage
M.2 PCIe SSD: 128 GB / 256 GB / 512 GB / 1 TB
USB-C
- 1 × USB-C: data, display and PD output for Florence Touch Display; 15 W (5 V/3 A), 60 W (12 V/5 A)
- 1 × USB-C: 10 Gbps data, display and PD input from Florence Brick Hub; up to 100 W (20 V/5 A; 15 V/3 A; 12 V/3 A; 9 V/3 A; 5 V/3 A)
- 1 × USB-C: data, display and PD output 60 W (12 V/5 A)
- 1 × USB-C: data only, for USB dongle
Wireless Option
Wi-Fi 6E, BT 5.3
OS
Windows 11 IoT, Linux Ubuntu 22.04
TPM
S/W TPM 2.0, Dual BIOS (optional)
Power Supply
100-240V, 50/60Hz, 65W
Cable
1 × USB-C to USB-C, 10 Gbps, 1 m (optional); power cord (optional)
VESA
75 × 75 mm; 4 × M4 × 4 mm screws
Storage Temperature
-20°C - 60°C
Operating Temperature
0°C - 40°C
System humidity
15% - 80%
Dimensions (WxHxD)
168.7 × 103 × 19.2 mm
Weight
0.49 kg
Brick Hub
Main Brick Hub
1 × Power LED
1 × USB-C: 10 Gbps data, display, PD 100 W
1 × RJ11: supports 2 cash drawers, 24 V / 12 V jumper setting
1 × Gigabit LAN (10/100/1000 Mbps)
1 × HDMI (Full HD)
4 × USB-A 3.2
1 × USB-C: data and display (Full HD)
Option Brick Hub
Option 1: 4 × USB-A 3.0
Option 2: 1 × Powered USB 24 V + 1 × Powered USB 12 V
Option 3: 2 × Powered USB 12 V
Option 4: 2 × RS232 (RJ45), with COM cable
Note: Options 1 to 4 must be assembled in order.
Power Adaptor
AC input: 100–240 V; DC output: 24 V / 5 A, 120 W
Optional: DC output 24 V / 10 A, 240 W
Storage Temperature
Cable
1 × lockable USB-C to USB-C, 10 Gbps, 1 m; power cord (optional)
Operating Temperature
0°C - 40°C
System humidity
15% - 80%
Dimensions (WxHxD)
Main Brick: 150.93 × 67.6 × 27.7 mm
Option Brick: 52.2 × 67.6 × 27.7 mm
Weight
Main Brick: 0.16 kg
Option Brick: 0.06 kg
Tell us what the workstation needs. We’ll tell you the modules.
Tell us about your checkout setup, the peripherals you need and your rollout plans. We’ll help you choose the right combination of Florence Display, Box and Brick Hub modules.
A checkout station is not judged on a datasheet but at the counter: when something is plugged in, when something fails, during a shift. Three consequences of the modular architecture that make the difference in operation.
